fix: low audit items — email channel, debug cleanup, roadmap sync, bare except logging

L18: remove comingSoon from email notification channel (SMTP backend already exists).
L19: remove console.debug useEffect from InlineCadViewer.tsx.
L20: sync ROADMAP.md priority status sections (P1/P2/P3/P8) with status snapshot — all Done.
L22: replace 8 bare except blocks in step_processor.py with logger.debug/warning
     so geometry calculation failures are visible in logs instead of silently discarded.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>

LEARNINGS.md

@@ -534,6 +534,12 @@ Der Admin-Settings-Endpunkt (`GET /api/admin/settings`) erfordert `global_admin`
 ### 2026-07-22 | Workflow-Editor | _legacy_dispatch umging cancelled/rejected Pre-Check
 `_legacy_dispatch` in `dispatch_service.py` rief `render_order_line_task.delay()` direkt auf und umging damit den Pre-Check in `dispatch_order_line_render` (der cancelled/rejected Lines überspringt). Alle Legacy-Dispatch-Pfade (auch im Graph-Fallback) liefen so durch, auch für bereits gecancelte Jobs. **Lösung:** `_legacy_dispatch` ruft jetzt `dispatch_order_line_render.delay()` auf statt `render_order_line_task.delay()` direkt.
 
+### 2026-07-22 | Maintenance | E-Mail-Kanal in NotificationSettings war dauerhaft deaktiviert
+`NotificationSettings.tsx` hatte `comingSoon: true` für den E-Mail-Kanal — das Backend-SMTP-System existierte bereits vollständig. Toggle war nur im Frontend deaktiviert. **Lösung:** `comingSoon` entfernt.
+
+### 2026-07-22 | Maintenance | Bare-except-Blöcke in step_processor.py schlugen Fehler still
+8 `except Exception: pass/continue` Blöcke in `step_processor.py` (Kanten-Winkelberechnung, Bounding-Box, Volumen/Flächen-Properties, Dreieckszählung, STEP-Raw-Parse) unterdrückten Fehler vollständig. Debugging von kaputten STEP-Dateien war so nahezu unmöglich. **Lösung:** Alle Blöcke auf `except Exception as _exc: logger.debug(...)` umgestellt; STEP-Raw-Parse-Fehler auf `logger.warning` da relevanter.
+
 ### 2026-07-22 | Architecture | CORS-Origins und Order-Prefix nicht konfigurierbar
 `main.py` hatte CORS-Origins hardcoded als Python-Liste. `orders/service.py` hatte den Ordernummer-Prefix `SA-` hardcoded. Beide Werte lassen sich jetzt per Umgebungsvariable überschreiben: `CORS_ORIGINS='["https://myapp.com"]'` und `ORDER_NUMBER_PREFIX=HM`. Default-Werte bleiben unverändert, keine Migration nötig.
 

ROADMAP.md

@@ -67,7 +67,7 @@ That removes the old assumption that USD work must wait for a Three.js USD loade
 
 This priority combines dead-code deletion and task decomposition because both are prerequisites for a controlled cut-over to USD.
 
-**Status:** In progress. M2 is complete; M1 and M3 remain open.
+**Status:** Done. All milestones complete as of 2026-03-13.
 
 **Milestones:**
 - M1: Dead code deleted — Pillow block, STL settings, orphaned directories
@@ -109,7 +109,7 @@ This priority combines dead-code deletion and task decomposition because both ar
 
 **Goal:** Introduce canonical part identity and the three-layer material assignment model while keeping the current GLB-based browser UX working end-to-end.
 
-**Status:** Not started in code. Architecture decisions are documented, but repo work has not begun.
+**Status:** Done. All milestones complete as of 2026-03-13.
 
 **Milestones:**
 - M1: `export_step_to_usd.py` produces valid USD with part hierarchy and `hartomat:partKey` on every prim
@@ -153,7 +153,7 @@ This priority combines dead-code deletion and task decomposition because both ar
 
 **Goal:** Eliminate fan triangles on cylindrical surfaces (rings, bearings) and produce clean seams for UV unwrap.
 
-**Status:** Not started in code. This is still a pure planning workstream at the moment.
+**Status:** Done. All milestones complete as of 2026-03-13.
 
 **Milestones:**
 - M1: GMSH 4.15+ installed in render-worker container
@@ -325,7 +325,7 @@ Currently `generate_usd_master_task` does not resolve the material map before pa
 
 **Goal:** Finish tenant isolation hardening, especially for non-HTTP execution paths.
 
-**Status:** In progress. HTTP-side RLS enforcement is now real; task-side propagation is the remaining gap.
+**Status:** Done. All milestones complete as of 2026-03-13.
 
 **Milestones:**
 - M1: `TenantContextMiddleware` registered; all HTTP requests set RLS context from JWT

backend/app/services/step_processor.py

@@ -345,7 +345,8 @@ def extract_mesh_edge_data(step_path: str) -> dict:
                         [round(pt_start.X(), 3), round(pt_start.Y(), 3), round(pt_start.Z(), 3)],
                         [round(pt_end.X(), 3), round(pt_end.Y(), 3), round(pt_end.Z(), 3)],
                     ])
-            except Exception:
+            except Exception as _exc:
+                logger.debug("Edge dihedral angle calc failed (skipping edge): %s", _exc)
                 continue
 
         # Bounding box
@@ -373,7 +374,8 @@ def extract_mesh_edge_data(step_path: str) -> dict:
                 "y": round((ymin + ymax) / 2, 2),
                 "z": round((zmin + zmax) / 2, 2),
             }
-        except Exception:
+        except Exception as _exc:
+            logger.debug("Bounding box calc failed: %s", _exc)
             dimensions_mm = None
             bbox_center_mm = None
 
@@ -580,7 +582,8 @@ def extract_step_metadata(step_path: str) -> StepMetadata:
                             [round(pt_start.X(), 3), round(pt_start.Y(), 3), round(pt_start.Z(), 3)],
                             [round(pt_end.X(), 3), round(pt_end.Y(), 3), round(pt_end.Z(), 3)],
                         ])
-                except Exception:
+                except Exception as _exc:
+                    logger.debug("Edge dihedral angle calc failed (skipping edge): %s", _exc)
                     continue
 
         # ── Step 4: Bounding box ──────────────────────────────────────────
@@ -601,8 +604,8 @@ def extract_step_metadata(step_path: str) -> StepMetadata:
                 "y": round((ymin + ymax) / 2, 2),
                 "z": round((zmin + zmax) / 2, 2),
             }
-        except Exception:
+        except Exception as _exc:
-            pass
+            logger.debug("Bounding box calc failed: %s", _exc)
 
         # ── Step 5: Build edge_data dict ──────────────────────────────────
         edge_data: dict = {}
@@ -866,8 +869,8 @@ def extract_rich_metadata(step_path: str) -> dict:
                     if vol > largest_volume:
                         largest_volume = vol
                         largest_name = name
-                except Exception:
+                except Exception as _exc:
-                    pass
+                    logger.debug("Volume properties failed for part '%s': %s", name, _exc)
 
                 try:
                     props = GProp_GProps()
@@ -877,8 +880,8 @@ def extract_rich_metadata(step_path: str) -> dict:
                         brepgprop.SurfaceProperties(shape, props)
                     area = abs(props.Mass())  # mm²
                     total_area += area * count
-                except Exception:
+                except Exception as _exc:
-                    pass
+                    logger.debug("Surface area properties failed for part '%s': %s", name, _exc)
 
         result["total_volume_cm3"] = round(total_volume / 1000.0, 2)     # mm³ → cm³
         result["total_surface_area_cm2"] = round(total_area / 100.0, 2)  # mm² → cm²
@@ -900,8 +903,8 @@ def extract_rich_metadata(step_path: str) -> dict:
                 min_dim = min(d for d in dims if d > 1e-6)  # skip degenerate
                 if min_dim < smallest_dim:
                     smallest_dim = min_dim
-            except Exception:
+            except Exception as _exc:
-                pass
+                logger.debug("Smallest dimension calc failed for shape: %s", _exc)
         result["smallest_dimension_mm"] = round(smallest_dim, 2) if smallest_dim < float("inf") else 0.0
 
         # ── Triangle and vertex counts from tessellation ──────────────────
@@ -928,8 +931,8 @@ def extract_rich_metadata(step_path: str) -> dict:
                         if tri is not None:
                             total_triangles += tri.NbTriangles()
                             total_vertices += tri.NbNodes()
-                    except Exception:
+                    except Exception as _exc:
-                        pass
+                        logger.debug("Triangle count failed for face: %s", _exc)
                     explorer.Next()
 
         result["total_triangle_count"] = total_triangles
@@ -1015,8 +1018,8 @@ def _extract_step_objects_fallback(step_path: Path) -> list[str]:
                             name = part.split("'")[1]
                             if name and name not in names:
                                 names.append(name)
-    except Exception:
+    except Exception as _exc:
-        pass
+        logger.warning("STEP raw text parse for product names failed: %s", _exc)
     return names
 
 

frontend/src/components/cad/InlineCadViewer.tsx

@@ -395,21 +395,6 @@ export default function InlineCadViewer({
   }, [modelReady, pinnedPart, isolateMode, hideAssigned, partMaterials])
 
   // Dev-only: log normalized GLB mesh names vs stored keys to diagnose mismatches
-  useEffect(() => {
-    if (!import.meta.env.DEV || !modelReady || meshRegistryRef.current.length === 0) return
-    const names = new Set<string>(meshRegistryRef.current.map(e => e.partKey))
-    const keys = Object.keys(partMaterials)
-    const matched = keys.filter(k => names.has(k))
-    const unmatched = keys.filter(k => !names.has(k))
-    console.debug('[CAD] Match status:', {
-      totalGlbMeshes: names.size,
-      totalStoredKeys: keys.length,
-      matched: matched.length,
-      unmatched: unmatched.length,
-      unmatchedKeys: unmatched,
-      glbNames: [...names].sort(),
-    })
-  }, [modelReady, partMaterials])
 
   const generateMut = useMutation({
     mutationFn: () => generateGltfGeometry(cadFileId),

frontend/src/pages/NotificationSettings.tsx

@@ -20,7 +20,7 @@ const EVENT_LABELS: Record<string, string> = {
 const ALL_EVENTS = Object.keys(EVENT_LABELS)
 const CHANNELS: Array<{ key: 'in_app' | 'email'; label: string; comingSoon?: boolean }> = [
   { key: 'in_app', label: 'In-App' },
-  { key: 'email', label: 'E-Mail', comingSoon: true },
+  { key: 'email', label: 'E-Mail' },
 ]
 
 const FREQUENCY_OPTIONS: Array<{ value: string; label: string }> = [